↳ Hypertherm's Basic Tips to Improve Cut Quality.↳ CNC Plasma Cutter Project Picture Gallery.↳ DXF Art - DXF Clip Art File Sharing Forum.DXF DESIGN & PROJECT PICTURE SHARING FORUMS.↳ Contributing Membership Registration or Renewal.WELCOME CENTER, GOOD INFO & MEET OUR SPONSORS.If you put the DTHC OFF cut rule in the wrong place, it will not keep it from turning on automatically Its a much better way to control the DTHC than using Cut Rules because its already off at the beginning of each cut and it can look ahead and determine if it needs to turn on. For those circumstances on smaller cuts (holes or other shapes) you have the Min Cut Length fo DTHC setting.
#Sure cuts a lot 4 overcut full
If you lower the feedrate in SheetCAM then it may be able to cut at the full speed you assign and VAD will not cut in. As a result the VAD works much better because the motion is constatnly being changed and it detects that instantly.
Commandcnc tracks the toolpath and adjusts the velocity to keep the cut inside the abilities of the mechanics rather than alter the toolpath to get max speed. In SheetCAM with a current POST you have a setting in the Operations called "Min Cut Length for DTHC" If you set that length to a value Greater than the total cut length (circumference + lead in) then the DTHC never turns on.
0 kommentar(er)
